Several common water pipe leakage treatment methods
How to deal with leaking water pipes at home? I believe this is what many people want to know. Are you in a hurry to move rescue soldiers everywhere, or are you confident enough to stay in danger? Maybe you used to be anxious and at a loss when faced with a leaking water pipe interface in the room, and how to deal with the problem of leaking water pipes. After reading this article, when When you encounter a leaking water pipe in your home, you will be confident.
leaking iron pipe
Solution:
1. If the iron water pipe with a diameter of 2 cm is leaking and the whole water pipe is corroded, close the main valve of the water pipe, and replace the whole water pipe of this section and put the screw buttons on both ends and screw it on. If only part of the location is damaged, cut off the water pipe at that location, and then use the instrument to thread the thread and connect the connector.
2. The iron water pipe with a diameter of about 20 cm leaks water, and the pipe body leaks. Grind off the embroidery of the original pipe body, and then repair it by welding. Note that it is necessary to insert a piece of iron plate that fits closely with the water pipe at the repair position for reinforcement. .
PPR plastic water pipe leaks
Use a small hacksaw to cut off the leak first - the cut should be flat. Sand the newly exposed port lightly, not too much. Apply special glue to the port, let it dry for a while, and apply water to the joint during this time. Then connect each PPR pipe fitting, and turn it several times to make the connection of the pipe more firm, and connect the other end of the pipe in the same way. After everything is done, apply an appropriate amount of glue to the seams to ensure no leakage.
PVC water pipe leaking
Solution:
1. If the water leakage is serious, buy a new PVC water pipe for joint processing. The specific method is: first put the interface into one end of the pipe, make the cut position flush with the other end, straighten it, put it directly to this end, make the cut position flush with the other end, straighten it, and send it directly to this end , so that both ends have a certain cross-connection distance (length), then disassemble it, and apply PVC glue to the inner side of the two ends and the outer side of the two downpipes.
Second, you can buy waterproof tape to wrap around the sewer pipe, and then smear it with mortar waterproofing agent and cement. If you can't handle it yourself, it's better to find a professional company.
Pipe joint leaks
If the fitting itself is broken and unusable, it needs to be replaced with a new one. If there is water leakage at the wire opening, it can be removed. If there is no rubber pad, install a rubber pad. If the rubber pad is aging, replace it with a new one. Apply thick white paint on the wire opening, and then wrap it with hemp silk or raw material tape. . If it is glued or welded, it is more difficult to solve the problem by yourself, and you need to find the manufacturer to solve the problem.