1. The installation position of the electronic remote water meter should avoid exposure, freezing, pollution and flooding, and facilitate disassembly, assembly and meter reading.
2. Water meters should not bear excessive stress caused by pipes and fittings. When necessary, the water meter should be mounted on the base or bracket;.
3. In order to compensate for the length error in the installation of water meters and facilitate the disassembly and assembly of water meters, it is suggested that the corresponding caliber expansion joints should be selected downstream of the water meters.
4. In order to facilitate the maintenance of water meters, install valves at appropriate locations upstream and downstream of water meters. Install a check valve downstream of the water meter when necessary;.
5. The newly installed pipeline must wash the stones, sediment and other debris in the pipeline before installing the water meter, so as not to cause the water meter malfunction;.
6. During installation and use, do not pull the metal hose to avoid damaging the sensor and the metal hose;.
7. Electronic remote water meter should be cleaned and re-calibrated every other time for long-term use, but it is not allowed to disassemble and assemble by itself.