Hebei Shanghong Meters Technology Co., Ltd. is one of the leading manufacturers and suppliers of electromagnetic flow meter dn3~3000 in China. If you're going to wholesale high quality electromagnetic flow meter dn3~3000, welcome to get pricelist and quotation from our factory.

Products Description

Flowmeter1

The electromagnetic flowmeter is an instrument used to measure the volumetric flow of conductive liquids based on Faraday's law of electromagnetic induction. It has been widely applied due to its high measurement accuracy, low pressure loss, and broad applicability

Products material

Material	Main performance
Polyurethane rubber	1. Very good wear resistance, like coal slurry, mud, ore slurry, etc. 2. Not resistant to acid, alkaline, and other corrosive or high-temperature media. 3. There must be no negative pressure in the pipeline.
Neoprene	1. Very good elasticity and wear resistance. 2. Capable of measuring domestic sewage, non-corrosive industrial sewage PH value: in the range of 6/7/8, temperature below 80 ℃ liquid. 3. There must be no negative pressure in the pipeline
Teflflon F-4 PTFE	1. Boiling-resistant hydrochloric acid, sulfuric acid, nitric acid, aqua regia, concentrated alkali and various organic solutions. 2. Strong abrasion resistance and poor bonding performance. 3. There must be no negative pressure in the pipeline.
Perchloroethylene propylene F-46(PTFE)	1. Based on all functions of PTFE, the temperature of non-corrosive liquid can be increased within 140 degrees. 2. Not resistant to fuming nitric acid, butyl lithium. 3. There must be no negative pressure in the pipeline.
Silicone fluoride lining	Temperature resistance: 70 degrees, mainly high temperature. It can be used to measure hot water in heating systems, and is not resistant to corrosion.