Water saving methods commonly used in building water supply and drainage equipment design
(1) Select water-saving and energy-saving equipment. High-quality gate valve fittings are used. Plays an important role in ensuring the quality of water supply. At present, there are quite a few old urban areas in my country that were built in the 1980s and 1990s. The pipelines use pig iron or steel pipes as water supply pipes. After long-term operation, the pipelines are seriously corroded, which not only pollutes the water supply, but also seriously ages, causing water seepage, Leakage and other conditions lead to the consumption of water resources. With the development of society, the selection of new environmental protection pipe fittings can effectively prevent the erosion of pipelines, ensure water supply reliably, and reduce the probability of water infiltration. Choose water-saving sanitation and water distribution equipment. Water consumption can be effectively manipulated. Improve water efficiency. Reduce cost of living. Saving water has become one of the key problems that the whole society pays close attention to. With the continuous improvement of the material civilization level of the general public, more and more attention is paid to drinking water safety. New sanitary appliances and water distribution appliances are based on the combination of open source and throttling technologies.
(2) Actively train relevant technical personnel. To carry out the development of its water-saving technology, it is necessary to pay attention to the establishment of a relevant water-saving technical personnel training system, continue to tap talents at this level, and comprehensively improve the professional quality and ability level of technical personnel, so as to comprehensively promote the improvement of my country's water-saving technical capabilities. At present, my country's water-saving and environmental protection treatment technology has made great achievements. However, there are still many problems that need to be dealt with in daily work. Therefore, we should take strong measures to improve and optimize it. Pay attention to personnel training. In the application of water treatment, different treatment methods have their own characteristics and advantages, for example, ultrasonic water treatment technology, reverse osmosis water treatment technology, etc. In addition, water-saving technicians should also learn from each other and exchange skills. By holding various symposiums on water-saving technology, we will learn new technologies related to water-saving together, exchange experiences with each other, talk about our thoughts on water-saving technology with everyone, and work together.
(3) Increase investment in water-saving and environmentally friendly water treatment technologies. With the development of society, my country's demand for water resources continues to grow. However, due to the low efficiency of water resources in our country, it has brought many shortcomings. Therefore, in order to promote the long-term and stable development of my country's economy, the protection of water resources should be strengthened. The level of water-saving and environmental protection water treatment technology immediately determines the utilization rate of water resources and the level of pollution. At present, although my country has begun to pay attention to the improvement of water-saving and environmental protection water treatment technology capabilities, there are still some problems, which seriously limit the development of this technology. Therefore, in the subsequent development process, it is necessary to increase the investment in this technology to promote the stable development of this technology.
(4) Secondary utilization of waste water and sewage generated in daily life. For reclaimed water that can meet the application standards, it must be used twice. Although this kind of water cannot meet our domestic water standards and cannot be drunk, it can be used for irrigation of urban green belts, water for urban fountains, etc. In the application of water energy, the efficiency of water use has been greatly improved, and it can also reduce the consumption of water resources, and can alleviate the tense situation of water resources in some cities. In addition, the rainwater can be treated in some ways to reach the level of reclaimed water, and the treated rainwater can also be used for irrigation of green belts and water for fountains. Special attention must be paid to the fact that due to the acceleration of the industrialization process, most of the precipitation in our country is smog, which also contains various fine particles, smoke and dust, etc. When treating the rainwater, it needs to be deposited first, and then used Various technologies make rainwater neutral before it can be used for rainwater.