Is smart water meter good? Smart water meter price
Smart water meter is a new type of water meter that uses modern microelectronics technology, modern sensor technology, and smart IC card technology to measure water consumption, transmit water data and settle transactions. Compared with traditional water meters that generally only have the functions of flow collection and mechanical pointer display of water consumption, smart water meters can not only record and electronically display water consumption, but also control water consumption according to the agreement, which is a great improvement. Then let's take a look at the relevant situation of the smart water meter.
Advantages of Smart Water Meter
1. The water consumption can be recorded and displayed electronically;
2. The water consumption can be controlled according to the agreement, and the water fee calculation of the step water price can be automatically completed, and the function of water data storage can be performed at the same time;
3. Data transmission and transaction settlement are carried out through IC cards, which have the characteristics of convenient transactions, accurate calculations, and the use of banks for settlement.
Smart water meter installation
1. Choose the correct caliber of the water meter;
2. Install horizontally, with the surface facing up, and the direction of the arrow on the case is the same as the direction of the water flow. The installation location should avoid exposure, flooding, freezing and pollution, and facilitate disassembly and meter reading. For newly installed pipelines, the sand, gravel, hemp and other debris in the pipeline must be rinsed before installing the water meter to avoid failure of the water meter;
3. Valves should be installed upstream and downstream of the water meter, and should be fully opened when using;
4. The necessary straight pipe sections or equivalent rectifiers shall be installed upstream and downstream of the water meter. The length of the upstream straight pipe section shall not be less than 10D, and the length of the downstream straight pipe section shall not be less than 5D (D is the nominal diameter of the water meter). For eddy currents caused by bent pipes or centrifugal pumps, a rectifier must be installed in front of the straight pipe section;
5. When installing the water meter, it should be noted that the outlet of the downstream pipe of the water meter is 0.5m higher than the water meter, so that the meter is incorrectly measured due to insufficient water flow in the pipe;
6. The water meter has excellent anti-clogging performance, but it is sensitive to silt and weeds in the pipeline, and should be avoided as much as possible during use. If there is silt and weeds in the pipeline, it should be cleaned up in time, otherwise it will affect the normal measurement of the water meter.
Precautions
1. After replacing the battery, you must close the moisture-proof cover and tighten the screws, otherwise the meter will not work and the card will display E-5.
2. Regularly check the operation of the smart water meter, and take care to prevent freezing in winter.
3. Please close the front and rear valves of the smart water meter if it has been installed in the pipeline but has not been delivered for use or does not use water for a long time (more than a week). The company does not bear the consequences caused by this.
4. If the electronic display of the smart water meter does not match the character wheel or the smart water meter is faulty, the character wheel measurement shall prevail.
