How to read the water meter
The degree of the water meter determines our water fee. We don't know much about this in normal times, so how do we look at the water meter? Next, let's pass the following content together, let's take a look at how to read the relevant content of the water meter in detail.
How to look at the smart water meter
In recent years, users of newly-built buildings and replacing water meters basically all use IC card smart water meters, and their disks are basically the same as digital water meters. After the IC card smart water meter is recharged, it is more economical and convenient for users to use water. If the amount in the card is used up, the water supply will be stopped at the same time. Remind users to pay attention to recharge in time when using this kind of water meter, and input to the water meter in the correct way after recharging to ensure the normal operation of the water meter.
How to look at the digital water meter
The first 4 digits of this water meter are black, the 5th digit is red, and there are only 3 red pointers. The “×0.1” beside the red pointer means “the number pointed by the pointer × 0.1 ton”; the “×0.01” beside the red pointer means “the number pointed by the pointer × 0.01 ton”.
How to look at a water meter is actually the same as a watch. The hour hand and the minute are related, but the pointers of the water meter are on different rotation axes. When the pointer is between two digits, the smaller number should be read. The hundred digit of the water meter is between 2 and 3. The one that is close to 3 is read 2, and then the tens digit must be around 8, because When the 8 in the tens digit reaches 10, the hundreds digit will correct 3.