Replacement, installation and seal management of water meters
Since the accuracy of water meter measurement has a certain working time limit and measurement range, the water meter should be replaced in time after a certain working time, and it should be replaced in time if it exceeds a certain measurement range to ensure accurate measurement results.
In the early years, we did not have a standardized model for the management of user water meters. The installation of water meters was disorderly, varied and varied. As long as there was no water leakage, the task was completed. repair. Some construction teams are reluctant to open another ladder to take over when there are many meters in the unit. Dozens of water meters are superimposed on one, and the surface level exceeds 1.5 meters. Due to the inconvenience of counting, many meters are artificially twisted, and the dials are inclined. , Seriously into 90 degrees, the water meter measurement is seriously inaccurate. For a water meter with an inclined surface, the sales department should send personnel to correct it. It is indeed a water meter that is difficult to read. The installation department should correct it to ensure that the water meter is accurately measured under the correct setting to avoid errors.
The seal on the water meter is in good condition, which proves that the watch is a qualified product that has been calibrated and is allowed to enter trade settlement. It is a legal sign of measurement. If the seal of the water meter is damaged, it means that the measurement of the water meter is likely to be inaccurate. However, the damage to the seal of water meters is a common phenomenon in trade settlement forms, with the number reaching more than 30%. Meters, damaged meters often occur, increasing the difference between production and sales. In response to this bad incident, in addition to increasing the inspection and punishment, it is recommended to restructure the meter box on the ground surface. Unified production, unified installation, unified management, and at the same time, it must not affect the user's right to know the amount of water. One-time-use locks can be adopted for the underground table, strengthen supervision, and formulate management methods to achieve reasonable water use, management of water, and reduce non-revenue Water waste.